The firing ceremony for the stepped kiln at the Ceramic Town Kiln Group Exhibition Center was successfully held.
Publish Time:
2020-04-11 16:34
Source:
On April 3, 2019, a firing ceremony for the stepped kiln was held at the Kiln Group Exhibition Center in the Ceramics Town. Lin Ying, director and vice president of Sanhuan Group; Li Chaoyou, director of the Technology Center; Luo Yusheng, chief designer of the stepped kiln; and other leaders attended the ceremony. Personnel from various functional centers, Xinsong Company, the Ceramics Research Institute, Deyi Flower Paper Factory, Fengyu Colorful Porcelain, the automated demonstration production line, and the senior and junior staff of Guoxiang Company participated in the event.
In the morning, Li Chaoyou, director of the Technology Center, led his colleagues in loading the stepped kiln. The level of kiln loading directly affects the control of the firing system and the quality of the fired products during the firing process. Therefore, colleagues were very careful in their operations, placing the ceramics steadily into the saggars and then into the stepped kiln, adjusting the placement according to the size of the kiln space. After the kiln loading was completed, Luo Yusheng, chief designer of the stepped kiln, held a meeting to give a detailed explanation on firing methods, precautions for firing operations, and temperature control during firing.



Pre-Firing Ceremony Meeting
At 2 pm, the auspicious time arrived. Li Chaoyou, director of the Technology Center, lit the torch and used it to ignite the furnace fire in the stepped kiln. The successful holding of the lighting ceremony means that the kiln fire in Beiliu will continue to be passed down in the hands of Sanhuan, which is of great significance to promoting Beiliu ceramic culture and reviving Beiliu ceramics.

Li Chaoyou, director of the Technology Center, lights the stepped kiln.

It is understood that the stepped kiln, independently invested and constructed by Sanhuan, is approximately 16 meters long and divided into 8 kiln chambers. It is built layer by layer up the slope, with each chamber of different sizes, 2 meters high and 1.5 meters wide. Each chamber has ventilation holes under the partition wall, and each chamber has a grate behind the partition wall. A chimney is built in the last kiln chamber, and the fuel is firewood. During baking, the lowest chamber is fired first. After the porcelain in that chamber is fired, the other chambers are fired sequentially. The type of ceramic fired this time is bone china, at a temperature of approximately 1270 degrees, with dedicated personnel taking turns on duty. In addition, the Kiln Group Exhibition Center has also built a steamed bread kiln, a round kiln, and a tunnel kiln.
Related News